Used to measure the light distribution curve, illuminance, light intensity data, beam angle, luminous flux and other parameters of small LED lamps (halogen lamps, cup lights, spotlights, bulbs, etc.)
The HP880 light intensity distribution tester is used to test the light distribution curve, light intensity data, beam angle, and equivalent luminous flux of small lamps such as LED spotlights and sem
GON2000 is ideally suited for analyzing the angle-dependent spatial radiation characteristics of large LED modules, solid-state lighting (SSL) products, and traditional lamps and luminaires.
HPG-1200 is a highly automated testing system. It can be widely used in traffic and automotive lamps and lanterns. The photometric performance test system adopts the internationally advanced CIE A-α m
HPG2000 is a C-type goniophotometer. It uses a reflector that moves in a circle around the center of the test lamp to reflect the light beam in the measurement direction of the lamp onto the photometr
HPG1900 is a type C goniophotometer. This system complies with the American Energy Star IES LM79 standard, European standard EN13032, GB/T9468 lamp distribution photometric test standard, etc.
HPG-1800 goniophotometer (single arm) used for testing the spatial photometric distribution (i.e. light distribution curve) of LED lamps (semiconductor lighting), road lamps, floodlights, indoor lamps
Welcome to Hopoocolor, a global leader in lighting optical detection built on innovation, collaboration and engineering excellence. Why Hopoo haveWithHopoo successfully developed a series of multi-functional optical testing equipment …
Read More
The CX-200F Fire Emergency Evacuation Indication System Brightness Testing System fully complies with the testing requirements of the latest national standard GB17945-2024 Fire Emergency Lighting and Evacuation Indication System.
Read More
VCX-400 video dynamic brightness measurement system is an intelligent measurement device designed for dynamic brightness test needs. It integrates dual-frequency GPS + Beidou positioning module and can be used for dynamic testing of outdoor dynamic landscape lighting, dynamic billboard brightness
Read More
HPCS-330UV Bluetooth spectral irradiance model, integrating spectrum, irradiance, and other parameters into one. The HPCS-330UV is a device specifically designed for measuring UVA, UVB, and UVC irradiance and wavelength. It uses a wireless Bluetooth connection
Read More
CXS-2600,CXS-6100 is a high-precision lmaging Colorimeter research and developed by Hangzhou Hopoo Light&Color Technology Company. lt uses SONY back-iluminated CMOs sensor and two-stage TEC semiconductor refrigeratiortechnology.
Read More
The HP880 light intensity distribution tester is used to test the light distribution curve, light intensity data, beam angle, and equivalent luminous flux of small lamps such as LED spotlights and semiconductor light-emitting devices. The instrument comes with a three-jaw chuck and a cross-shaped
Read More
CXS series Image luminance colorimeter can meet the test requirements if various light-emitting devices in car, display, lighting and other industries, matching a user-friendly software. Built-in high precision matching XYZ filter that conforms to the CIE human eye visual function.
Read More
HPG2000 is a C-type goniophotometer, a moving mirror goniophotometer recommended by the American national standard NSI/IESLM-79-2019. The reflector that moves in a circle around the center of the test lamp reflects the light beam in the measurement direction of the lamp onto the photometric detector
Read More
CX-2600 is a high-precision imaging luminance meter independently developed by Hopoocolor. It uses SONY back-illuminated COMS sensor and two-stage TEC semiconductor refrigeration technology. It can work in a set constant temperature environment, thus greatly reducing the sensor cost.
Read More
Used to measure the light distribution curve, illuminance, light intensity data, beam angle, luminous flux and other parameters of small LED lamps (halogen lamps, cup lights, spotlights, bulbs, etc.) and single high-power LEDs.The instrument is designed with an optical dark box and light barrier
Read More
According to CIE, IESNA, national standards and other requirements, the C-Y measurement method is realized by rotating the lamp.Used to measure the spatial light intensity distribution and various photometric parameters of various LED indoor lighting fixtures, floodlights, and road lighting fixture
Read More
HPCS6500P Grow light Version high-precision photometirc,Colorimetric and Electric Test System, the whole machine adopts aluminum alloy chassis, embedded high-speed processor, 10.1-inch color LCD Touch screen, Use interaction. The system integrating high-precision spectrometer, DC power supply,A
Read More
We are committed to becoming a leader in optical measurement industry and a world-renowned brand.
We will continue to raise our horizon, look at the world, take the concept of global management as a guide, aim at leading international enterprises, constantly innovate, deepen reform, cultivate talents, and create a value chain of enterprises with global advantages.
ICP：浙ICP备15040053号-9 
