The HP880 light intensity distribution tester is used to test the light distribution curve, light intensity data, beam angle, and equivalent luminous flux of small lamps such as LED spotlights and semiconductor light-emitting devices. The instrument comes with a three-jaw chuck and is equipped with a cross-shaped clamp, which is convenient for installing lamps and light-emitting devices, and is cost-effective.
The HP880 light intensity distribution tester is used to test the light distribution curve, light intensity data, beam angle, and equivalent luminous flux of small lamps such as LED spotlights and semiconductor light-emitting devices. The instrument comes with a three-jaw chuck and a cross-shaped
Welcome to Hopoocolor, a global leader in lighting optical detection built on innovation, collaboration and engineering excellence. Why Hopoo haveWithHopoo successfully developed a series of multi-functional optical testing equipment …
Read More
The SPCX-1200 spectral imaging luminance meter adoptsa specia measurement method
Read More
The HPTLS-100 is a multi-channel LED-based tunable light source designed to simulate indoor and outdoor lighting with high uniformity and dynamic range.
Read More
CXS series Image luminance colorimeter can meet the test requirements if various light-emitting devices in car, display, lighting and other industries, matching a user-friendly software. Built-in high precision matching XYZ filter that conforms to the CIE human eye visual function.
Read More
HPG2000 is a C-type goniophotometer, a moving mirror goniophotometer recommended by the American national standard NSI/IESLM-79-2019. The reflector that moves in a circle around the center of the test lamp reflects the light beam in the measurement direction of the lamp onto the photometric detector
Read More
CX-500 imaging type luminance meter includes LED lighting including lighting research. Street lamp road brightnesstest. light environment test， LED LCD display surface brightness analysis. etc.
Read More
CX-1200 imaging luminance meter can be used for lighting research including LED lighting, street light road brightness testing, light environment testing, LED (LCD) display surface brightness analysis, etc.
Read More
According to CIE, IESNA, national standards and other requirements, the C-Y measurement method is realized by rotating the lamp.Used to measure the spatial light intensity distribution and various photometric parameters of various LED indoor lighting fixtures, floodlights, and road lighting fixture
Read More
HPCS-6300 series spectroradiometer integrating sphere testing system is a multi-parameter and multi-functional comprehensive test system that integrates photometric parameters, chromatic parameters, electrical parameters, etc.
Read More
HPCS-330IR is a device specifically designed for measuring the intensity and wavelength of light. It is used for red light therapy, infrared remote control emission tubes, infrared lasers, and others. It uses a wireless Bluetooth connection, spectrometer probe, and screen display separately.
Read More
This system uses the method of fixing the detector and rotating the measured lamp to measure the light intensity distribution in all directions of the measured light source or lamp space.
Read More
CXS-2600,CXS-6100 is a high-precision lmaging Colorimeter research and developed by Hangzhou Hopoo Light&Color Technology Company. lt uses SONY back-iluminated CMOs sensor and two-stage TEC semiconductor refrigeratiortechnology.
Read More
We are committed to becoming a leader in optical measurement industry and a world-renowned brand.
We will continue to raise our horizon, look at the world, take the concept of global management as a guide, aim at leading international enterprises, constantly innovate, deepen reform, cultivate talents, and create a value chain of enterprises with global advantages.
ICP：浙ICP备15040053号-9 
