Colorimeter and Spectrometer Manufacturers

HPCS-330UV 230-450nm UV Spectrometer Wireless

HPCS-330UV Bluetooth spectral irradiance model, integrating spectrum, irradiance, and other parameters into one. The HPCS-330UV is a device specifically designed for measuring UVA, UVB, and UVC irradiance and wavelength. It uses a wireless Bluetooth connection

HP-1700 NIR SPECTROMETER(380-1700NM)

HP-1700 (infrared version) is specifically designed for measuring irradiance and wavelength from visible light to red light and infrared light bands, used for red light therapy, infrared night vision monitoring, infrared remote control emission tubes, infrared lasers, and other measurements.

CX-2600/6100 IMAGING PHOTOMETERS

CX-2600 is a high-precision imaging luminance meter independently developed by Hopoocolor. It uses SONY back-illuminated COMS sensor and two-stage TEC semiconductor refrigeration technology. It can work in a set constant temperature environment, thus greatly reducing the sensor cost.

CX500 SERIES IMAGING LUMINANCE METER

CX-500 imaging type luminance meter includes LED lighting including lighting research. Street lamp road brightnesstest. light environment test， LED LCD display surface brightness analysis. etc.

HPTLS-100 Tunable Uniform Light Source

The HPTLS-100 is a multi-channel LED-based tunable light source designed to simulate indoor and outdoor lighting with high uniformity and dynamic range.

CX-1200E IMAGING ILLUMINANCE METER

Used for measuring the illuminance distribution of special light sources for lens imaging, small LED light sources, and analyzing the quality of low-power laser spot imaging.

VCX-400 2D VIDEO LUMINANCE METER

VCX-400 video dynamic brightness measurement system is an intelligent measurement device designed for dynamic brightness test needs. It integrates dual-frequency GPS + Beidou positioning module and can be used for dynamic testing of outdoor dynamic landscape lighting, dynamic billboard brightness

HPG2000 VERTICAL VERSION GONIOPHOTOMETER (MIRROR TYPE)

HPG2000 is a C-type goniophotometer, a moving mirror goniophotometer recommended by the American national standard NSI/IESLM-79-2019. The reflector that moves in a circle around the center of the test lamp reflects the light beam in the measurement direction of the lamp onto the photometric detector

HPG1800 GONIOPHOTOMETER (SINGLE ARM VERSION TYPE C)

This system uses the method of fixing the detector and rotating the measured lamp to measure the light intensity distribution in all directions of the measured light source or lamp space.

HPUL-IS50 INTEGRATING SPHERE UNIFORM BRIGHTNESS SOURCE

HPG1200 GONIOPHOTOMETER for IES

HPG1200 is a type A-a traffic light goniophotometer recommended by CIE. It is designed according to ECE, SAE, GB. JIS, FMVSS108 and other standards.

CX-1000 IMAGING LUMINANCE METER&PHOTOMETER

CX-1000 imaging luminance meter can be used for lighting research including LED lighting, street light road brightness testing, light environment testing, LED (LCD) display surface brightness analysis, etc. The test includes the brightness of any point on the image, the average value, maximum value,